Search This Blog

Monday, 25 February 2013

Hot Runner Gives A Better Production Within A Normal Lead Time

The hot runner system or the molds are better equipped with the advantages of less materials for preparation and hence shorter cycles of the process. The regrind of the plastics that are hardened are not done in this system as they remain liquid inside the runner. The hot runners are a little expensive at the inset but as you continue to produce the goods, you will find there are little maintenance charge and you can get the good produced in much lesser cost than you had been doing till now.

The new level of expertise is gained through the new system of hot runner injection mould which can change the idea of the mold making. The system is not complicated or specialized for few technicians to operate the mold but with some good training all of the workers can learn the way to operate the injection mold. The leading manufacturers have a leading team of workers who help even in the proper installation of hot runner and in starting of the system. You can get the workers easily to work on the production side as they do not need much specific knowledge about the operation of the runner.

The initial investment of the hot runner system can be considered to be on the higher but as you continue working with the system you will find the system is good and will give you long term benefits. The design of the system is simple and the so the hot runner reduces cost of production as there is nothing that can make the whole thing time consuming or costly. The lead time is low and the liquid inside the runner that is placed in the molds are always the allowed to harden and then another nozzle is used for the rest of the materials. This reduces the cost of regrinding or of wastage of the materials. 

For more information about hot runner technologies, please visit our website

Wednesday, 20 February 2013

Hot Runner Temperature Controller And Manifold System Brings In Modern Changes

The hot runner system is the best to optimize the thermal profile of the production house and there is always a consistency of the material that is used for the production. The modern technology has brought changes for the selection of the runners and you can find there are different reasons why you must choose a particular type of runner. The Hot Runner Temperature Controller is a unique system that controls the internal temperature so that the material that is made and is in form of liquid does remain in the same liquid state. 

One can prepare the molded goods with these materials without regrinding them is a much better option. There are internal nozzles that are better than the traditional nozzles too and you will be able to keep the maintenance cost and the repairing hassles to a minimum. The product manufacturer will be able to inject the material in the proper way through the nozzles that you can keep heated for the mould temperature controller. They are ready for the injection of the materials in the mold.

There are other parts of the hot runner and they are the hot runner manifold system. The temperature uniformity is important for the proper flow of the material and for preventing runner obstruction or degradation of the materials. The manifold systems are there to bring changes in the plastic production by offering the cost effective customized solution for high performance. There are some special designs that you can opt for like changing colors for some parts in few minutes can save you a lot of time. These changes can be made with the help of the manifold system.

For more information about hot runner temperature controller, Please visit our website

Monday, 18 February 2013

Hot Runner Mould Heaters For Maintenance And Control Of Heat Inside The Runner

The hot runner is performing the work of keeping the plastic granules in their liquid state as they have a controller for temperature and can keep the internal temperature to the same place for the free flowing of the material. The hot runner nozzle in the runner is of two types and one is heated internally and the other type is the external heating of the nozzle with the help of coils. These coils run externally and are heated. 

When these coils are heated the touch of the coil does not remain constant. There are some air bags created in the middle and so the coil does not heat the runner in a uniform manner. The hot runner mould heaters are used for keeping the temperature inside in control and in an uniform state. The control on heat is the main condition for injection molds and these are for the creating heat profiles that can help in reduce of materials that goes waste. Now the material remains liquid and the nozzles are better tipped and the molds can also take more heated materials.

These eliminates the chance of overheating in the runner or the leaking of the liquid or the maintenance downtime for the nozzle when you have these hot runners for using in the preparation of the molded goods. The hot runner is therefore preferred over the cold runner mode and still there is many a factory where both the runners are used for different types of situations. The incorporation of internally heated runners are preferred in most cases but the factories continue maintaining both the processes. 

Thursday, 14 February 2013

Hot Runner Maintenance Should Be Done With Experienced Person at Regular Interval

The proper maintenance of the hot runner is a careful work and it needs patience and focus of mind. The person who does the maintenance should have thorough knowledge of the runner and the way it works. The person needs to remove the parts and then handle different tools to make the machine work better or in the proper way. The hot runner maintenance takes discipline and you sometimes need to investigate about the way the valves or pins or the heaters, manifolds and the other tools work. 

The hot runner manifold system has got its complex interiors and it needs tooling and probes for maintaining the parts in a good condition. The referential measures are taken from time to time and you can check the setting of the tools and probes and the spacers are in the proper place. The cleaning and handling are done to feel the inside parts are in proper place or not and the cleaning makes them ready for another haul of working. The manifolds need proper handling of the toolings and it should rest flat on the probes.

You may find the probe or manifold to be improperly placed and you can also find pinched wire or there leaks in the system. The hot runner controls should be checked for proper functioning and you must also clean the interior and place the parts in the right way. The machines often takes time to heat up and expand and then start to work and in these cases the wiring gets encapsulated and you must check them too.

For more detailed information Please visit

Monday, 4 February 2013

Looking For the Best Supplier of Hot Runner Controls

If you consider the immense progression of the plastic technology, you will definitely get an idea of the fact that the popularity of these injection molds has increased to a great extent. However, it is also very important to understand the hot runners are important parts of the injection molding equipment, and there should always be the existence of the hot runner controls. These controls are designed in such a way, so that these can easily control the distribution of temperature within the system. There are many companies that currently manufacture these controls for the hot runner technology. Therefore, as a mold manufacturer, you will definitely benefit a lot from it.

Looking For the Best Supplier:

The availability of the hot runners, as well as, the controllers is definitely not a problem. Therefore, it is always a wise idea on your part to look for the best hot runner supplier, so that with the installation of the runner systems, you can be completely assured of the fact that the system will run efficiently and smoothly. This will not only reduce the consumption of the energy, but at the same time, it will also help you in saving money to a great extent. Therefore, looking for such a supplier is definitely a wise option.

Faster Hot Runners:

Nothing can be better than that of getting faster and efficient runners for your mold injecting equipment. Therefore, before finalizing any deal with the hot runner supplier, you should always make it a point that you are being supplied with some of the best runners that can give you reliable and efficient performance, as a whole. Therefore, you should always try to consult with your supplier regarding this factor, so that you absolutely not have to be worried about it, as a whole.

While getting the hot runner and the hot runner controls, it is also very important for you to take a note of the fact that you check out each and every part of the system that is being supplied to you by the supplier should be checked out quite thoroughly, so that you never have to compromise with the efficiency and the performance of the system. This in turn, will also be worth the value of your money, and you will also be relieved with the supplier. Therefore, you can get constant supply of the runner controls from the same supplier at lesser rates.

A Dedicated Supplier:

A dedicated hot runner supplier will also ensure you fast and timely delivery, so that you do not have to face any problem with the operation of the system. Consequently, you can also expect to get faster outcome and results from the system due to which you will not have to be worried. Therefore, being a mold manufacturer, your primary task will be to look for the supplier that will help you in wide varieties of ways that you can hardly imagine. This will also result in increased productivity that can increase your profit opportunities.