Search This Blog

Wednesday, 25 September 2013

Hot Runner Troubleshooting Can Increase The Efficiency And Performance

In the plastic mold industry, one of the most important components used in the process of injection molding is hot runner. The level of productivity and efficiency associated with the entire process can be largely increased with the help of the system. In fact, the cycle of production is also lowered. Since the hot runner performs such an important function, you should never underestimate the importance and need for hot runner troubleshooting. There can be several kinds of problems associated with this system. Irrespective of the problem, make sure that you take the help of a technician to get it fixed.

Inefficient Controlling Of Temperature:

The controller in the hot runner system performs an important function. It is often due to some problems that the controller might operate inefficiently. This will clearly be evident when the temperature is not controlled properly while the process is on. This is a significant problem, and think of hot runner troubleshooting at the earliest. Lack of repair might also create a short circuit increasing the chances of accidents. Therefore, you should always be careful about this point.

Complete Breakdown:        
You never know when the system might completely break down. This is usually the case when you do not take adequate care and maintenance. This should not be the case, because if the hot runner breaks down, the entire machine might stop functioning. Make sure that you have spare parts, so that lack of functioning of a single part can be immediately replaced by the spare part. 

To get more information about the Hot Runner Installation & Troubleshooting, Please visit our official website

Wednesday, 11 September 2013

Importance Of The Presence Of Hot Runner System In The Injection Molding Equipment

You must have seen plastic parts in several designs and shapes. These are mainly because of the molds that are produced through the injection molding process. One of the major components of an injection molding machine is a hot runner system. The material that comes into this system is left in a molten state, but is not ejected with a molded part. The importance and usage of this system is immensely felt in the injection molding machines in today’s date.

Different Types:

There are generally two different types or varieties in which a hot runner system is available. The insulated runner molds are one of them which comprise of oversized molds in mold plate. It helps in giving insulted effect to the plastic when heat is applied to it and provides a molten flow path. On the other hand, there are heated runners which are again available in two different designs. These can be internally heated or externally heated. The first system takes the advantages of insulating effect by means of which it melts the plastic. The second is available with different types of insulating features.

Making Use As Per Needs:

The injection molding machines that are manufactured today are available with different kinds of hot runners. It is rightly on the basis of the needs that the hot runner on the machine can be installed and used. Each of these is available with different types of features and specifications. Knowing about these in advance can really prove to be beneficial and effective.

To get more information about the Hot Runner Company, Please visit our official website

Wednesday, 4 September 2013

Injection Molding System is The Best Way To Manufacture Molds

When it comes to the manufacturing of molds, the manufacturers mainly prefer going for the Injection Molding System. This is a machine that offers lots of efficiency and quicker results compared to other systems used in the manufacture of molds. Moreover, most of these machines available today are operated electronically. This means the amount of human labor and effort required in controlling the entire process is reduced. There are different units installed in the system responsible for controlling different kinds of functions automatically and electronically.

Increased Level Of Molding:

The mold manufacturers are seeing a bright future for the mold industry. With the rapid progression of technology, plenty of new things are being made available. Consequently, it is possible for these manufacturers to invest in large numbers of things. It is because of the high performance and greater efficiency that the electric molding machine is getting greater importance. Consequently, the demand and popularity of such a system is rising to an immense scale.

Fast Running Applications:

The electric Injection Molding System is also capable of offering fast running applications and processing speed. As a result, the amount of time required for each cycle is significantly reduced. Moreover, the power consumption with such a system is low, while the amount of chilled water required is also very less. The impact on the overall environment is also lower, which in turn results in plenty of benefits as a whole. This is the reason why larger numbers of mold manufacturers are looking for the system.

To get more information about the Injection Molding Company, Please visit our official website